Skip to:  Epoxy Coatings /  Polyaspartic & Urethane /  Decorative Flooring Systems
EPOXY COATINGS

TK-WATER BASED EPOXY 2049

Item No.: TK-2049

A two-component, self-priming epoxy coating for concrete and steel applications where maximum durability and chemical resistance are needed. The high-gloss finish is available in both clear and colored formulations.

Features:
  • Forms a penetrating, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Forms an inseparable bond with the surface that is chip and peel resistant.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data |  LEED Points
 _________________________________________________________________________________________________________________

TK-EPOXY WATERPROOFING COATING

Item No.: TK-2671 (low solids), TK-2675 (high solids)

A two-component, penetrating, waterproofing, epoxy resin sealant for concrete. Formulated as a preventative treatment - although it may also be used for maintenance and repair work - TK-EPOXY WATERPROOFING COATING prevents corrosion and deterioration of concrete (and re-bar) due to moisture infiltration and chloride ion attack.
Available in two formulations:

1) TK-2671 lower solids formulation which meets the VOC content regulations of the Federal EPA (maximum VOC content 600 g/l).
2) TK-2675 higher solids formulation which meets the VOC content regulations of the Federal EPA, OTC and LADCO (maximum VOC content 400 g/l).

Features:
  • Penetrates the surface to provide ultimate protection from within.

  • Prevents costly corrosion and damage caused by moisture, chemicals, grease or oils.

Downloads:  Technical Data  |  Safety Data (low solids) |  Safety Data (high solids)  | LEED Points
_________________________________________________________________________________________________________________

TK-HI-TECH 2

Replaces TK-Hi-Tech Maximum Solids Epoxy

A two-component, solvent-free, high-build, 100% solids epoxy/amine system designed specifically for concrete floor applications where maximum durability and chemical resistance are needed.  The high-gloss finish is available in both clear and standard colored formulations.

Features:
  • Easy, user-friendly roller application

  • Forms a tough, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Virtually odor-free during installation and curing, making it ideal for interior applications.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data |  LEED Points

___________________________________________________________________________________________

TK-HI-TECH V

Replaces TK-Hi Plus 100% Vertical Epoxy

A two-component,solvent-free, high-build, high solids, 100% epoxy/amine system designed specifically for vertical concrete applications where maximum durability and chemical resistance are needed. The high-gloss finish is available in both clear and ready-made standard colored formulations.

Features:
  • Easy, user-friendly roller application

  • Forms a tough, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Virtually odor-free during installation and curing, making it ideal for interior applications.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data 

_________________________________________________________________________________________________

POLYASPARTIC & URETHANE

TK-WATER BASED URETHANE 1900

Item No.: TK-1900

A clear, water-based urethane specially designed for floor finishing and sealing. It provides excellent protective properties against chemicals and abrasion to surfaces where acrylic finishes fall short. Available in clear or tinted formulations as well as a matte finish formulation (TK-1900-1).

Features:
  • An excellent floor finish for environments where resistance to chemicals and abrasion are necessary.

  • Imparts an attractive glossy, non-yellowing finish.

Downloads:  Technical Data  |  Safety Data |  LEED Points

_________________________________________________________________________________________________

TK-POLYASPARTIC 2425

Item No.: TK-2425

A two-component, chemically resistant polyaspartic offering outstanding durability and toughness against scratching and abrasion. Its high gloss finish and availability in either clear or colored formulations make it ideal for beautifying and protecting interior surfaces.

Features:
  • Incorporates a unique combination of flexibility and impact resistance for ultimate strength and surface protection.

  • Excellent resistance to damage caused by chemical attack or ultra-violet rays.

  • Fast drying time allows most projects to be completed within one day.

Downloads:  Technical Data  |  Safety Data |  LEED Points
_________________________________________________________________________________________________________________
DECORATIVE FLOORING SYSTEMS

TK-EPOXY COLOR SYSTEM VOC

A two-component, high-gloss, colored epoxy coating for use on concrete, wood or metal in areas subjected to heavy traffic, abrasion, and/or chemical attack.  Available in standard colors (see color chart at right) as well as clear, black, white and OSHA yellow.  "VOC" formulation meets VOC content requirements.

Features:
  • Forms a tough, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Adheres to the surface and forms an inseparable bond that is chip and peel resistant.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data |  LEED Points
 _________________________________________________________________________________________________________________

TK-EPOXY FLOOR CHIP KIT

A complete 100% solids, solvent-free, epoxy floor system for commercial, residential and industrial areas requiring strength and durability with a decorative finish.  Includes tinted epoxy and decorative chips in a choice of colors.

Features:
  • Forms a tough, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Virtually odor-free during installation and curing, making it ideal for interior applications.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data |  LEED Points  |  Application
 _________________________________________________________________________________________________________________

TK-EPOXY/POLYASPARTIC FLOOR CHIP KIT

A complete liquid applied epoxy floor system for commercial, residential and industrial areas requiring strength and durability with a decorative finish.  Includes tinted epoxy and decorative chips in a choice of colors.

Features:
  • Forms a tough, high strength coating that is resistant to abrasion from heavy traffic and is unaffected by rubber burns.

  • Resistant to damage caused by exposure to alkalis, solvents, acids, salt solutions and water, fats, oils and fuels.

  • Formulated with resins which work as an adhesive within the slab, strengthening it around minor cracks, crevices and weak spots.

  • Virtually odor-free during installation and curing, making it ideal for interior applications.

  • Low maintenance, high-gloss finish is smooth, durable and easy to clean.

Downloads:  Technical Data  |  Safety Data