|
Previous Page
Meeting ASTM C-309 water based & water/solvent emulsions
- Acrylic
TK TRI-SEAL is a 100% water based, high solids, premiere acrylic resin compound formulated to cure, seal, protect and dustproof concrete as well as to seal many types of porous tile and resilient floor. TRI-SEAL is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants and private residences where solvent systems are difficult to use). The resin used in TRI-SEAL will resist softening better than any other resin on the market when water puddles on it. Also available is TK TRI-SEAL CCS a concrete colored pigment is added to cover blemishes. TRI-SEAL CCS needs the surface to be opened up for good adhesion. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 200-300 Sq. Ft./Gal.
Applicable Standards:
-ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
-Federal spec. TT-C-0800
-AASHTO Des. M-148, Type 1, Clear.
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
Achro Kure AK-2 WB is a 100% water based, premiere acrylic resin compound formulated to cure, seal, protect and dustproof concrete as well as to seal many types of porous tile and resilient floor. Achro Kure AK-2 WB is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants and private residences where solvent systems are difficult to use). The resin used in Achro Kure AK-2 WB will resist softening better than any other resin on the market when water puddles on it. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 150-300 sq. ft./gal.
Applicable Standards:
-ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
-AASHTO Des. M-148, Type 1, Clear.
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
TK-Kure & Seal WB -is a 100% water based acrylic resin compound formulated to cure, seal, protect and dustproof concrete as well as to seal many types of porous tile and resilient floor. TK-Kure & Seal WB is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants and private residences where solvent systems are difficult to use). Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 150-250 sq. ft./gal.
Applicable Standards:
-ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
-AASHTO Des. M-148, Type 1, Clear.
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
- Dissipating Hydrocarbon Resin
TK-2519 DC WB is a 100% Resin Water/Solvent Emulsion Base Dissipating Curing Compound. It's designed use in for curing freshly placed concrete surfaces, allowing the concrete to achieve maximum hardness and density by restricting the evaporation of available moisture within the mix. It can be used on both vertical and horizontal surfaces, interior and exterior, i.e. sidewalks, floors, walls, curbs and gutters, or wherever proper concrete curing is desired. TK-2519 DC WB is designed to not have a tenacious bond to the substrate for easier removal. TK-2519 DC WB chemically becomes very brittle after 28 days, average construction traffic will wear it off. Areas where there is little traffic a power sweeper with stiff bristle brushes, or a buffer with a coarse 3M pad will take it off. This process leaves the concrete surface suitable for subsequent coating of liquid floor hardeners, penetrating sealers (silanes), epoxies, and cementitious toppings. Read label or Spec Data sheet before using.
Coverage Rate: Broomed Finishes 200-300 sq. ft./gal.
Troweled Finishes: Exterior 300 Sq. Ft./Gal., Interior 400 sq. ft./gal.
TK-2519 DC WB meets ASTM C-309 Type 1, Class B, and Type 1D with a red dye added, and AASHTO M-148 Type 1, Class B.
Data Sheet MSDS Sheet
TK-2519 WB is a 100% Resin Water/Solvent Emulsion Base Curing Compound. Its designed use is for curing freshly placed concrete surfaces, allowing the concrete to achieve maximum hardness and density by restricting the evaporation of available moisture within the mix. TK-2519 WB can be used on both vertical and horizontal surfaces, interior and exterior. TK-2519 WB can be used on sidewalks, floors, walls, curbs, gutters, or wherever proper concrete curing is desired. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 200-300 sq. ft./gal.
TK-2519 WB meets ASTM C-309 Type 1, Class B, and Type 1D with a red dye added, and AASHTO M-148 Type 1, Class B.
Data Sheet MSDS Sheet
Meeting ASTM C-1315 water based
TK TRI-SEAL 1315 is a 100% water based, high solids, premiere acrylic resin compound formulated to cure, seal, protect and dustproof concrete as well as to seal many types of porous tile and resilient floor. TRI-SEAL 1315 is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants and private residences where solvent systems are difficult to use). Also available is TK TRI-SEAL 1315 CCS a concrete colored pigment is added to cover blemishes. Read label or Spec Data sheet before using.
Coverage Rate: Curing and Sealing 300-500 sq. ft./gal.
Applicable Standards:
-ASTM C-1315, Type 1, Class A ,B, C
-ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added.
-Federal spec. TT-C-0800
-AASHTO Des. M-148, Type 1, Clear.
-Approved by the Resilient Tile Institute to be compatible with most resilient tile.
-USDA approved.
Data Sheet MSDS Sheet
Next Page
|
|
