|
TK-ACETONE DYE is a solvent based, translucent dye that is formulated to color and add aesthetic value to any interior cementitious surface. Acetone Dye comes pre-mixed and ready to use. It is available in 16 standard colors, or colors may be combined to create an unlimited range of color combinations.
Data Sheet MSDS Sheet Acetone Dye Color Chart
BRIGHT SEAL is a blend of 100% methyl methacrylate polymers used as a superior burnish block and exposed aggregate sealer and protective coating. Bright Seal will bring out the color and give a high gloss to the substrate it is applied to. Bright Seal is an excellent sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, or any cementitious material where a high-gloss and no yellowing or discoloration can be allowed. The coating is clear and does not yellow, nor degrade, with age or exposure to ultraviolet rays. Read label or Spec Data sheet before using.
Coverage Rate: 100-400 Sq. Ft./Gal depending on the porosity of the substrate.
Data Sheet MSDS Sheet
BRIGHT SEAL WB is a 100% water-based sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, burnish block, or any cementitious material. Bright Seal WB is to be used where solvent odors are not tolerable. Bright Seal WB is the only water-based sealer that can bring out the wet look in the surface to be sealed.
Data Sheet MSDS Sheet
TRI-SHEEN ACRYLIC is a 100% acrylic, breathable masonry coating. With the use of specially designed acrylic polymers and advanced adhesion monomers, TRI-SHEEN ACRYLIC offers the following advantages over standard multipurpose paint coatings:
-will not fade, chip, crack or peel.
-resistant to ultraviolet degradation.
-will not support mildew growth.
-stays cleaner longer, sheds dirt easily.
-a breathable film resulting in no internal entrapment of moisture vapors.
-long-term color retention.
-for use on exterior or interior surfaces.
-brush, roll, or spray application.
-custom colors available.
Data Sheet MSDS Sheet
TRI-SHEEN CONCRETE SURFACER (Smooth) is a non-cementitious protective texture coating designed for all above-grade vertical surfaces. It is blended using high performance, 100% acrylic, copolymers and advanced adhesion monomers. It can be used for interior and exterior applications on the following substrates: poured or precast concrete, block, brick, stone or stucco. It comes in various colors and can be top coated with TRI-SHEEN ACRYLIC.
Data Sheet MSDS Sheet
TRI-SHEEN CONCRETE SURFACER (Fine, Medium, Coarse Texture) is a non-cementitious, protective texture coating designed for all above grade vertical surfaces. It is blended using high-performance, 100% acrylic, copolymers and advanced adhesion monomers. The grade of texture is achieved using various sizes of siliceous volcanic rock, silicas, and siliceous powders. It can be used for interior and exterior applications on the following substrates: poured or precast concrete, block, brick, stone or stucco. It comes in various colors, and can be top coated with TRI-SHEEN ACRYLIC.
Data Sheet MSDS Sheet
TK-COLOR CHART - for all products that come in color.
TEXTURE REFERENCE CHART - Textures for Tri-Sheen Concrete Surfacer and Tri-Lastic
TRI-SHEEN PIGMENTED STAIN offers the same qualities as TRI-SHEEN ACRYLIC, except it is designed to be a low-viscosity, semi-opaque acrylic for staining concrete rather than coating it.
Data Sheet MSDS Sheet
TRI-SHEEN ACRYLIC STAIN offers the same qualities as TRI-SHEEN ACRYLIC, except it is designed to be a medium-viscosity, opaque acrylic especially designed for wood or wood-like surfaces.
Data Sheet MSDS Sheet
TRI-LASTIC is a protective, decorative, elastomeric acrylic coating with high-quality, 100% acrylic, resins for concrete, masonry and stucco. It has excellent elongation and recovery properties. TRI-LASTIC has excellent resistance to stains, dirt, acid, alkali, air-borne pollutants, mildew, and degradation from freeze, thaw or ultraviolet rays. TRI-LASTIC will bridge hairline cracks and move with the substrate throughout a wide range of temperatures. It forms a film which is waterproof to wind-driven rain, but is permeable to water vapor, eliminating entrapment of moisture vapor in the substrate. TRI-LASTIC contains no plasticizer and will not become hard or brittle through many years of exposure. TRI-LASTIC provides an elastomeric, long-lasting, waterproof coating for exterior or interior properly prepared concrete, block, brick, stone, and stucco.
Data Sheet MSDS Sheet
ELASTA BLOCK is a high quality 100% acrylic porous block primer filler with elastomeric properties.
Data Sheet MSDS Sheet
TRI-METHOXANE is a severe-duty masonry coating specially formulated for masonry surfaces that are subjected to severe use. Areas where TRI-METHOXANE should be specified are on grade or near roadways' surfaces. TRI-METHOXANE is also an excellent coating for masonry buildings, block, brick, precast panels, or any above grade vertical surface. Read label or Spec Data sheet before using.
Data Sheet MSDS Sheet
|
|
